Brenden

This is how to take apart a frozen master cylinder found on many mid 70's Honda Motorcycles with disc brake. Rebuild kit is available here: http://www.common-motor.com/honda-cb-master-cylinder-reb...

In this video we sync the carbs on a Honda CB360T in the streets using the Carburetor Synchronization Tool Kit: http://www.common-motor.com/honda-360-carburetor-synchronization Symptoms that your b...

This video shows the two-step process on how to perform the proper carburetor synchronization on the Honda CB350 / CL350 / SL350K0 family of motorcycles. Step one - setting the idle speed synchron...

             This video shows the two-step process on how to perform the proper carburetor synchronization on the Honda CB450 / CL450 / CB500T family of motorcycles. The process is shown on a CB350...

This is step by step of how to properly adjust valve clearance on the Honda CB360, CL360, and CJ360 series of motorcycles. Valves must be set every 1500 miles (2400 km). This is the second step in...

This video shows how to properly adjust the cam chain tension on the Honda CB360, CL360, and CJ360 family of motorcycle engines. Cam chain adjustment is the first step in the regular engine tune-u...

"It only needs a carburetor clean and a battery". It is the most common line that you will hear at any facebook marketplace, craigslist, or swap meet meetup. The fact that carburetors go bad as fas...

               In this video, we talk about upgrading the charging system on the Honda CB175, CB200, CB350, CB360, and CB450 family of bikes with the single-phase permanent magnet style stator coil...

In this video we show you how to change the fork on on a 1974 Honda CB360 (CL360 and CJ360 are the same) while keeping the forks on the bike. This technique can be applied to the CB350 / CL350 and ...

The engine is apart and clean we need to measure the cylinders, valves and valve guides. Proper measurements of these internal engine parts will determine the direction of the rebuild. This requir...