Brenden

Here is a quick video to help you figure out what size helmet fits your head. Measure your head circumference just above the eyebrows, across the temples and around the back of your head. We recomm...

Tough order on oversize pistons for the 500T. The engine uses the same bore as the CB450 and CL450, but a longer stroke. Thus they use the same cylinders and piston rings.  Wiseco would be able to ...

                 The factory Honda handlebars were designed to have the wires from each of the switch boxes run through the bars and exit out an elliptical hole at the bottom of the bars near the t...

There are a few possible reasons for this: Depending on the physical size of your order we may have sent it to you in multiple packages, make sure to check your email for multiple tracking notific...

  We understand that sometimes you might forget an item or two after placing an order. If this happens, please follow the steps below to request that your new order is shipped with a previous one: ...

Since this video doesn't show much in the way of setting up the carb sync equipment... So towards the front of the carbs on the outside/bottom near the intake manifold there is a little plug that ...

               For cleaning out rusted gas tanks, we like to use ordinary white vinegar with some loose screws or some chain to loosen up the rust. Fill it up all the way to the very top (important...

Shockwave quick reference information: Sensor Distance to Trigger Cam:  0.010" / .25 mm Ignition Coil Resistance : 3.5 Ohms Min Supply Voltage : 12V DC Shockwave Technical Downloads Shockwave In...

As of mid-2018, the original stock of Japanese-made ignition points available for the Honda CB350 family of bikes (CB350 / CL350 / SL350) has pretty much dried up. New points made in China are stil...

If you've recently done work on your handlebars, triple tree, or switch boxes and your horn and/or starter buttons no longer work there's a good chance that the buttons are not completing their cir...