Brenden

In general, apply an anti-seize compound to threads of bolts that need periodic removing, particularly in the case of steel bolts threaded into an aluminum casting, and bolts that experience extrem...

            In this video, we show you how to install Japanese motorcycle bullet connectors as well as other types of electrical connectors common to vintage Honda CB175, CB200, CB350, CB360, CB450...

CB350: 3.2 US gal., 12 lit., 2.6 Imp. gal. CL350: 2.4 U.S. gal., 9.0 lit., 2.0 Imp. gal. SL350: 2.4 U.S. gal., 9.0 lit., 2.0 Imp. gal.

The cable housing barrel adjusters are used only to remove slack from the cable, not to adjust the clutch itself. The clutch adjustment is made where the clutch cable enters the engine. The precise...

              With each carb diaphragm we sell, we will email you, the customer, a PDF instruction sheet on how to install them. Should you have more questions this video shows the installation pro...

In the automotive parts world, it is common to see an additional fee associated with a part purchase called a "core deposit." This deposit is to ensure that the original, worn out part known as the...

If you are looking to keep your stock headlight bucket on your CB350 / CB360 / CB450 / CB500 / CB550 / CB750 it's always recommended to upgrade your factory sealed beam to a modern, replaceable bul...

Unfortunately there's no way to remove the starter without removing the side cover, as the starter drive gear and chain will just drop into the engine. Consider the side cover gasket when doing thi...

Stator coils are not the most common culprit in the charging system. The two most common gremlins in the charging system are a faulty battery (common with Lead Acid batteries) or a bad regulator/re...

The truth is the ignition systems were designed for use with a battery. We prefer AGM (absorbent glass mat) type. The bikes will not work with a capacitor (or battery-less) system nor are they a ma...