Brenden

Read this article we've written about the Honda CL360 / CJ360 / CB360 Cam Chain Tensioner Replacement. http://www.common-motor.com/Honda-CL-CJ-CB-Cam-Chain-Tensioner-Replacement_b_11.html   http:...

18.5 mm (0.73 in.) (factory)18.5mm (0.73 in.) - 16.5mm (0.65 in.) (recommended)   Note: The reason we recommend a range of float heights for the CB/CL/CJ360 family of bikes is that every motorcycle...

Main Jet Primary (Needle Jet): #110 (factory) / #100 (rebuild)Main Jet Secondary: #68Idle Jet (Pilot Jet): #35

Lubrication and inspection of the drive chain should be happening every 500 miles / 800 km. Maximum slackness when measured by moving the drive chain vertically is 10 to 20mm (0.4 to 0.8 inches).

Standard (non O-ring) clip type master link drive chain with a 530 pitch will work. Watch our YouTube video on how to count the links in your chain for the appropriate length. http://www.commo...

The main fuse is a 15A fuse and the sub-fuses are 7A fuses. http://www.common-motor.com/honda-glass-fuses-15a http://www.common-motor.com/honda-360-500-glass-fuses-7a

Gap specification: 0.7 - 0.8 mm (0.028 - 0.032 in.)

BR8ES (NGK) UPDATE: As of January 2020, NGK has discontinued the B8ES and superseded with the BR8ES. The BR8ES is a resistor plug, which is designed to reduce electromagnetic interference of igniti...

Front and Rear tire inner tube sizes: 18" x 3.25" - 4" http://www.common-motor.com/honda-inner-tube

Front and Rear tire inner tube sizes: 18" x 3.25" - 4" http://www.common-motor.com/honda-inner-tube