In part 5 of our Honda CB450 engine rebuild the cylinder head is installed and torqued in place (copper washers on the studs with oil flow). Then the ever so tricky camshaft alignment and cam chain installation is locked down by pressing together the master link.
Then we move back to the bottom of the engine and install the reminding side covers with new gaskets and stainless Allen head bolts along with any remaining pieces to button up this CB450 engine.
Cam Chain Tool : https://www.common-motor.com/chain-breaker
Honda CB450 Cam Chain: https://www.common-motor.com/honda-450-cam-chain
Honda CB450 Cam & Rocker Rebuild Service : https://www.common-motor.com/Honda-CB350-CB360-CB450-CB500T-CB550-Rebuilt-Camshaft-Rocker-Arms
Honda CB450 Overhaul Gasket Kit: https://www.common-motor.com/honda-450-500-gasket-kit
Honda CB450 Oil seal kit : https://www.common-motor.com/honda-450-500-oil-seal-kit
Honda CB450 Stainless Steel Bolt Kit : https://www.common-motor.com/honda-450-allen-bolt-kit