Honda CB360 Carburetor Rebuild Part 1

http://www.common-motor.com

In part one of our Honda CL / CJ / CB360 carburetor rebuild we explain some of the parts and pieces on the Keihin carburetor body. Then we assemble the jets and emulsifier tubes, along with the float needle and seat. Afterwards we install the float and adjust the float height; a new gasket is applied to the float bowl then the bottom side of the carburetor is sealed up.

Honda CB360 Carburetor Diaphragm: http://www.common-motor.com/honda-cb360-carb-diaphragm

Honda CB360 Carburetor Rebuild Kit: http://www.common-motor.com/honda-cb360-carb-rebuild-kit

Honda CB360 Intake Manifold: http://www.common-motor.com/honda-carb-boots

Honda CB360 O-ring Kit: http://www.common-motor.com/honda-360-carb-o-ring-kit