In part two of our Honda CB350 (CL350 Scrambler / SL350) , CB360 (CL360 / CJ360), CB450 (CL450 / CB500T), CB550 steering bearing upgrade we show you how to install all the parts of our tapered roller steering bearing kit. Things start with packing each of the bearings with grease and installing the lower bearing on the bottom triple tree (use the thinner of the large shim washers in the kit under the seal and bearing). The upper and lower bearing races are chilled and tapped into place in the frame and coated with grease. Finally the upper bearing and dust cap are installed and seated. This tapered roller steering bearing is an excellent upgrade for the front end handling of our Honda CB360.