In part 2 of our Honda CB450 engine rebuild we finish up all the assemblies for the lower half of the engine. This includes the installation of the electric starter and rotor on the left side of the engine. While on the right side of the engine we install the shift shaft with seal, clutch basket with new clutch discs, oil pump and torque the oil filter nut to spec to hold it all in place. We then move on to measuring the end gap on the piston rings.
Honda CB450 Starter Clutch Rebuild Kit: http://www.common-motor.com/honda-450-es-clutch
Honda CB450 Oil Seal Kit: http://www.common-motor.com/honda-450-500-oil-seal-kit
Honda CB450 Clutch & Spring Rebuild Kit: http://www.common-motor.com/honda-cb-450-clutch-rebuild
Honda Oil Filter Nut Tool: http://www.common-motor.com/honda-cb-oil-filter-tool
Honda CB450 Piston Rings: http://www.common-motor.com/honda-cb450-cb500t-standard-piston-rings
Feeler gauge: http://www.common-motor.com/feeler-gauge-set