https://www.common-motor.com/honda-450
In part 4 of our Honda CB450 engine rebuild we prepare the cylinder head to be installed on the cylinders. Cam chain guides are bolted in place, and new chain dampers are dropped on the camshafts. Cam followers are lubricated and installed on their respective adjusters and the camshafts are placed in each side of the head with the end covers bolted on to hold them in place. A dab of three bond gasket sealer is applied to the cylinder head dowels and the head gasket is installed in prep for the head.
Honda CB450 Cam Chain Dampers : https://www.common-motor.com/honda-cb450-camshaft-gear-rubber
Honda CB450 Cam & Rocker Rebuild Service : https://www.common-motor.com/Honda-CB350-CB360-CB450-CB500T-CB550-Rebuilt-Camshaft-Rocker-Arms
Honda CB450 Overhaul Gasket Kit: https://www.common-motor.com/honda-450-500-gasket-kit
Honda CB450 Stainless Steel Bolt Kit : https://www.common-motor.com/honda-450-allen-bolt-kit
Three Bond / Honda Bond Gasket Sealer : https://www.common-motor.com/three-bond