Brenden

Tandy has got his MB-650 Dnepr motorcycle to finally start after a full rebuild. This project has been over the coarse of several years and countless hours here at Common Motor Collective. Dnepr ...

https://www.common-motor.comThe clutch adjuster on the Honda CB450 (CL450 Scrambler / CB500T) families of bikes is a frequently neglected part of the clutch system. While the actual adjustment i...

http://www.common-motor.com/long-haul-part-5In part 5 of our Long Haul project 1974 Honda CB450 K7 we dig into the front end of the bike. We install tapered roller steering bearings, rebuild the...

http://www.common-motor.com/long-haul-part-6In part 6 of our Long Haul project 1974 Honda CB450 K7 we install new mufflers, reinstall the fuel system (carburetors, intake manifolds, tank, petcock...

http://www.common-motor.com/long-haul-part-7In part 7 of our Long Haul project 1974 Honda CB450 K7 we hit the road on the way to Lexington, OH to visit the 2018 AMA Vintage Days! We covered over ...

https://www.common-motor.com/long-haul-part-8The Ride Continues! In part 8 of our Long Haul project we ride our 1974 Honda CB450 K7 from the 2018 AMA Vintage Days on north west. We bed down in C...

Here is a quick test to see if there is a bad condenser is on your vintage Honda CB or CL Scrambler. Run your bike with the points cover off in a dark environment and watch the points open and cl...

Removal of a very stuck Torsion bar spring on a CB450 Cylinder Head. Be careful not to nick the gasket sealing surfaces when attempting to pry the parts loose.

https://www.common-motor.com/long-haul-part-9In part 9 of our Long Haul project we perform some basic maintenance on our 1974 Honda CB450 K7. After 5000 miles of road trip riding, it is time to a...

Here is a quick example of the Shockwave ignition system running on a Honda CB360 Motorcycle.