In part one of our Honda CL360 / CJ360 / CB360 carburetor rebuild we explain some of the parts and pieces on the Keihin carburetor body. Then we assemble the jets and emulsifier tubes, along with the float needle and seat. Afterwards we install the float and adjust the float height; a new gasket is applied to the float bowl then the bottom side of the carburetor is sealed up.
Honda CB360 Carburetor Diaphragm: http://www.common-motor.com/honda-cb360-carb-diaphragm
Honda CB360 Carburetor Rebuild Kit: http://www.common-motor.com/honda-cb360-carb-rebuild-kit
Honda CB360 Intake Manifold: http://www.common-motor.com/honda-carb-boots
Honda CB360 O-ring Kit: http://www.common-motor.com/honda-360-carb-o-ring-kit